• JGTech Hypro PR+1512  1.5 Ltr/min 12v pump

Full 2 year warranty Hypro Hydraulic 12v PR+1512 pump.  Suitable for most autopilots Simrad, Navman, Raymarine, Cetrek etc..  See guides below

 Backed with over 30 years of continuous development the new PR+ range of reversing pumps presents the ultimate in quiet and smooth operation. Unlike noisy piston pump designs the precision gear form delivers smooth flow in all conditions and with minimal noise. Now with IP67 motors that have a 4000 hour brush life these latest generation of Hydraulic Projects power units are the best available.

The PR+ pumps are available in 0.6, 0.8, 1.0, 1.5, 2.0 and 2.5 litre per minute flows. Pilot check valves are fitted as standard, they can be used with both balanced and unbalanced cylinders. They have an advanced protective coating designed especially for the salt laden atmosphere of the marine environment.

Voltage 12 / 24 VDC 
                                                       Typical amp-hour                   Max current 
                                                       5 bar at 25% duty                   Intermittent 55 bar 

                    Nominal L/min              12v        24v                        12v          24v                                               

PR+06                0.6                             0.9         -                             9.0           - 

PR+08                0.8                             1.3         -                            14.0           -

PR+10                1.0                             2.2        1.0                         19.0        9.0

PR+15                1.5                             2.4        1.2                         24.0      11.0 

PR+20                2.0                             2.5        1.3                         25.0      12.0 

PR+25                2.5                             2.7        1.4                         34.0       15.5 

Ingress Protection:                                    IP67 
EMC Protection:                                        BS EN 60945:2002 (DC) 
Ignition protection:                                   BS EN 28846:1993
                                                                     EN ISO 10592:1995 (Small Craft - Hydraulic Steering Systems)

Ambient operating Temperature:         -15 to +55 deg C 
Max Pressure:                                            55 bar (intermittent operation) 
Reservoir line:                                            2 bar Max 
Ports:                                                           G1/4 (BSPP) Parallel 
                                                                     A = ram port 
                                                                     B = ram port 
                                                                     R = reservoir port                 
Rotation:                                                     Red lead to - positive Pressure to A port 
                                                                     Black lead to positive - Pressure to B port 
Hoses:                                                         Suitable for working pressure 55 bar. 
Minimum burst pressure:                       100 bar. 
Fluid:                                                           ISO VG10 to VG40 Hydraulic mineral fluid meeting ISO 6743-4 HV

Autopilot Reversing Drive Selection

A basic guide to aid selection of a PR+ reversing pump for your vessel. Always refer to the autopilot manufacturers documentation to ensure that the chosen pump is compatible.

JGTech Hypro PR+1512 1.5 Ltr/min 12v pump

  • Brands JGTech
  • Product Code: PR+1512
  • Availability: Out Of Stock
  • £379.00

  • Ex Tax: £315.83

Related Products

Navico NAC-2 autopilot computer 000-13249-001

Navico NAC-2 autopilot computer 000-13249-001

The low-current NAC-2 autopilot computer is ideal for smaller vessels, designed to run small hydra..

£949.99 Ex Tax: £791.66